Видео

I cannot wait to go and Rip’ 🙌🏼 Great job Guys !!!

You lost me at the ratchet straps

It's not bad, if you don't mind going even slower.

Fall flannel for life

I've got an aventon ramblas, I'm an old guy and don't do much schredding these days, I want to completely remove the dropper and cable and go with a suspesion seat post, is that possible w/o too much hassle? Thanks

Awesome vid! Planning to fly from Los Angeles next year to do a guide tour of mtb Madeira. Can you share your flight schedule and did you encounter any baggage issues? How long was the flight? Many thanks!

This is such a good video. It doesn't just tell you what to do, but how to learn to do what you're telling us to do.

Thats the only bike thats noisier than mine

Is that also part of Rude Awakening? We rode that in October and it was moist and slick. So much fun!!!!

Hey! I live in NH and am hoping to ride the Belknaps this weekend. I’ve hiked them many times and recognize a few spots in your vid, but would love to get the full route, if possible. Any chance you can share it with me via strava?

Thanks for the GREAT video and simple tips for how to do drops. I know believe I know what I have to do to start small and build to higher drops. #TrustTheBike #Commit

Very good video. Why do you run a trainer specific tyre? Ive heard that rollers make less damage on your tyres than tarmac does.

I love the way u innovate

Perfect explaination Suscribed!!!

Hey man what's going on I know I'm late to the party on this video but I just came across it. I just started getting back into mountain biking and just recently bought my first rail trail bike me and my girlfriend are heading out tomorrow wondering if you had any recommendations for some flow trails near and around Clinton Massachusetts

Hello.. I want to replace the coil shock on my Devinici Magma Mountain bike with a gas shock…

Good warranty. I like reserves warranty. I hate the reserve price though

It is sad how worn down it is now in 2024

Bryan is Superstar! But please, help him to adjust cockpit, hes progress will be twice faster.

Why not use black pipe instead?

And what sponsors you have/which for travel? Big things I’m looking for.thanks

I’m a tbi survivor; healing from lots/ and travels the world to inspire ❤ great vid

Looks like a great place for a hardtail

what lenses do you use on the nikon?

Best install video anywhere. Thanks

People that live in the areas where people "boondock" have never heard the term used that way. Guess we really do live in the boondocks.

Great video! I’ve only done Endless Brook because it is so good! I need to experience the rest of the network.

I might return my carbon bar and just get the aluminum

very good explanation

Now the thing I see that I would do different than what everyone is doing is I would make a smaller diameter tube and make it square and depending on the size of your rv/truck/etc you can add rows for what ever volume you need. This distributes the weight evenly and it also is more surface area for the water to heat up. You could also make it hinged so it could be angled toward the sun. I have seen a similar design from a friend and it would get super hot like too hot but that was in Texas. If I knew I would be dealing with that I might make a cold water mix. You could also just make a separate pvc pipe pump that has a valve for filling but also a valve that connects to the water so you could pressurize it first then release it. Then you could judge the size you need for the length of shower you want. I also have a 12v outlet in the back of my Element and I have a airpump for my tires that I could set to 30 psi and just push a button when its starts to fade.

Nice video. Great how you start the video and give us all we need and don't just jump in to project. Appreciate it. I have built some off grid outdoor showers that I made a pvc chamber that was separate from an old hot water heater. I would have to pump it like 30 time to get a decent shower. I later found an old vw 12v air pump that ran off a battery. I did'nt take long to pressurize the hot water tank and enjoy a shower with two showerheads at the same time.

Could you do a double capacity by putting a u joint at the front and add another long tube? Also about how much does it weigh with water?

Minimum speed is enough for the back wheel to clear the lip before the front wheel begins dropping. Great video series.

I want to do India Nepal travelling by bycycle but No money

Fat is better!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Tnks. Going 2carbon.😀

I ride my fat bike year round on all terrain. I prefer it over my hardtail mtb. I’m way more confident in the gnar on my fat bike and it’s so much FUN

Hello, good evening, I am about to do this as a project for the science fair, I wanted to know more about exactly how many times I should pressurize, also if you could give me some suggestions. Thank you!

Curious about the decision to use the WYE hub rather than another elbow at the other end. An elbow would reduce the total number of joints and would reduce the cost, but I may be missing some obvious advantage of the WYE hub.

Glad to see I’m not the only one that sets a million alarms instead of trusting my groggy snooze button skills

Now I know what to do with all the cutoff pieces of wood left over from building my deck. LOL

i live in the neighborhood right near there

I haven't had a bike for quite some years now, some of these new features are awesome! This is one I definitely want as with the last bike I had I kept the seat down all day (and my knees grew strong AF, yes xD) For a piston that could fail and break your butt.. I would not cut any corners xD This can happen with office chairs too so... yeah, quality control is important. But it'd be out of proportion to use the Bluetooth kind in the bike I have in mind and between the other 2 options I'd prefer mechanical as hydraulics is something I only wanna deal with for the breaks.. but not the cheapest tier of mechanical dropper posts.

I have one question, could i put 27.5 wheels to this megatower frame? I’m a little guy so its better for me to use 27.5, i just saw a megatower frame

For a XC TRAIL bike like the Marin bobcat trail 3 with 25mm inner width rims and 29x2.25 tires, would you put 2.4 inch tires, for riding uphill and downhill single tracks?

So rad! Reminds me of the old trails that hardy and jersey Dave built many years ago in the same area. Can’t wait for this season!

The resistance change is manual right?

I've ridden fats (4 & 5 wide tires - studded) not just in snow (4 to 5 in w/o deflate) mainly waiting to ice/hard pack & have to say it's a blast, having on a few rides in morn side to side side walks icing (peeps having a time getting around) & have to tell U its an head turner (wondering how in the hell am I riding that thing - needing some ice straps or whatever for u're shoes). Have done mtb patrols (IMBA BP) on 1 as well. Just got a AWD fatty tho snow/ice round my area that's another (if we get 5" around here during the season we're lucky)......

Totally bongworthy dude,like,totally...

Fat biking is awesome. I have 2 of them. 1for winter and one for summer.😎👍